| Rob's Super Awesome Totally Rad Number One Pachinko Page! |
>
How
to go
from
this.
to go
from
this.
| Words go here! Its been 4 years, why ain't this finished?? :-D I lost all the pictures I had when my laptop died and haven't built anymore since so couldn't take any more pictures, but I still plan to make more and take more pics and finish this page!! :-D - 8/14/2010 |
| Tools I used: Cheap compound miter saw $15 drill Electric screwdriver 1/8" drill bit 24" bar clamps 12" clamp |
| Other stuff you'll need: Wood 1 5/8" No.__ screws Small screws __" No.__ 2- 3" L bracket things Pencil |
| Tools that you will need for all steps. (Except #1) Drill w/ 1/8" drill bit Screw driver or bit for drill |
| *Some machines are a little wider than 20 1/2", so make sure to measure your pachi and adjust this measurement accordingly. |
| Step 1: Cut the wood See above. |
| *It is recommended that all holes be pre drilled!* |
| Wood cut list: 3- " 1x10s 4- " 1x10s 1- " 1x4 2- " 1x4s 2- " 2x4s 4- " 2x4s 1- " 1x2 2- " 1x2s |
Page 2: The Base!!!
| Step: 2 :-) |
| Step: 3 :-) |
| Step: 4 :-) |
| Step: 5 :-) |
| Step: 6 :-) |
| Step: 10 :-) |
| Step: 9 :-) |
| Step: 8 :-) |
| Step: 7 :-) |
| Step: 11 :-) |
| Step: 12 :-) |
| To this. |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
